(iii b) . Book Chapters:
| C1. |
E. J. Lavernia, J. A. Ayers, T. S. Srivatsan, chapter in book entitled
Rapid Solidification of Structural Materials, T. S.
Srivatsan and T. S. Sudarshan, editors, published by Technomic Publishing
Co., 1993. (a modified version of this paper appeared as a comprehensive
paper in the International Materials Reviews see #J39). |
| C2. |
H. Jones, N. Grant and E. J. Lavernia, Chapter 2 entitled, "Synthesis
and Processing", in book entitled Elements of Rapid
Solidification, Springer Verlag, 1998. |
| C3. |
H. Jones and E. J. Lavernia, Chapter 5 entitled, "Mechanical
Properties and Behavior", in book entitled Elements
of Rapid Solidification, Springer Verlag, 1998. |
| C4. |
H. G. Jiang, M. L. Lau, V. L. Tellkamp and E. J. Lavernia, chapter
entitled "Thermal Spray Processing of Nano Scale Materials",
in book entitled Handbook of Nanostructured Materials and
Nanotechnology, H. S. Nalwa, ed., Vol. 1, Ch. 3, 1999. |
| C5. |
B. Li and E. J. Lavernia, chapter entitled "Spray Forming
as a Non-equilibrium Processing Technique", in book entitled
Non-Equilibrium Processing of Materials, C. Suryanarayana,
ed, Pergamon Materials Series, Vol. 2, pp. 153-193, 1998. |
| C6. |
E. J. Lavernia, M. L. Lau and H. G. Jiang, chapter entitled, "Thermal
Spray Processing of Nanocrystalline Materials", in book entitled
Nanostructured Materials, Kluwer Academic Publishers,
1998. |
| C7. |
B.Li and E. J. Lavernia, chapter entitled, "Spray Forming
of MMCs", in book entitled Comprehensive Composite
Materials, Volume 3 - Metal Matrix Composites, Elsevier
Science Ltd., 2000. |
| C8. |
Maggy L. Lau and E. J. Lavernia, chapter entitled "Thermal
Spray Processing of Nano Scale Materials", in book entitled
Nanostructured Materials, C. Koch, ed., 2001. |
| C9. |
E. J. Lavernia, J.P. Delplanque, Merton C. Flemings, Diran Apelian,
chapter entitled "Reactive Spray Atomization and Deposition",
in book entitled Encyclopedia of Materials: Science and
Technology, 2001. |
| C10. |
D. Cheng, G. Trapaga, J. W. McKelliget and E. J. Lavernia, "Mathematical
Modeling of HVOF Spraying: An Overview," ASME Book Chapter,
2000 ASME meeting, Orlando, Florida, November 2000. |
(iv). Invited Papers
| I1. |
E. J. Lavernia and N. J. Grant, "Ultrasonic Gas Atomization",
Metal Powder Report, Vol. 4, April 1986, pp. 255-260. |
| I2. |
E. J. Lavernia, J. Jacob and Y. C. Han, "Economic Modeling
of Rapid Solidification Processes", Quantitative Modeling
of Materials, Processing and Markets, symposium held at M.I.T.,
Cambridge, MA, October 23, 1986. |
| I3. |
E. J. Lavernia and N. J. Grant, "Recent Developments in the
Spray Deposition of Alloys Using the Liquid Dynamic Compaction Technique",
Proceedings of the Sixth International Conference on Rapidly
Quenched Metals, Montreal, Canada, August 3-7, 1987. |
| I4. |
E. Gutierrez and E. J. Lavernia, "A Mathematical Model of
the Liquid Dynamic Compaction Process", M.I.T. Symposium
on Atomization Processing, 20-21 August, 1987. |
| I5. |
E. J. Lavernia, J. Baram and N. J. Grant, "Developments in
Gas Atomization and Spray Deposition", Metal Powder Report,
pp. 688-695, October 1987. |
| I6. |
E. J. Lavernia, "Spray Deposition Processing of Aluminum Lithium
Alloys", in conference proceedings of the Fourth Israel
International Materials Engineering Conference-I.M.E.C. IV,
Beer-Sheva, Israel, 7-8, pp. 79-86, December 1988. |
| I7. |
E. J. Lavernia, "Spray Atomization and Deposition Processing
of Particulate Reinforced Metal Matrix Composites", in conference
proceedings, International Conference, Fifty Years of Evolution
in India, Calcutta, India, 8-9 April, 1990. |
| I8. |
E. J. Lavernia, "Manufacturing of Particulate Reinforced MMCs
using Spray Processes", conference proceedings, Symposium
on Metal Matrix Composites, organized by the Society of Manufacturing
Engineers, Nov. 14, 1990, Anaheim, California. |
| I9. |
F. H. Froes, C. Suryanarayana, and E. J. Lavernia, "Synthesis
of Light Metals for Aerospace Applications", Conference proceedings,
Science and Engineering of Light Metals, edited by K. Hirano,
H. Oikawa and K. Ikeda, Sendai, Japan, October 13-16, (1991), The
Japan Institute of Light Metals, pp. 43-50. |
| I10. |
F. H. Froes, C. Suryanarayana, W. E. Quist, E. J. Lavernia, B. I.
Bondarev, N. F. Anoshkin, I. S. Polkin, O. K. Fatkullin, V. Samarov
and A. B. Notkin, "Advanced Aerospace Metals, Requirements,
and Characteristics - An Overview", conference proceedings,
Second ASM Paris Conference: Synthesis, Processing and Modelling
of Materials, Key Engineering Materials, Trans Tech, Switzerland,
Vol. 77-78, pp. 1-38, 1992. |
| I11. |
E. J. Lavernia, "Synthesis of Particulate Reinforced Metal
Matrix Composites using Spray Atomization and Co-Deposition",
SAMPE Quarterly, January, pp. 2-12, 1991. |
| I12. |
E. J. Lavernia and Y. Wu, "Synthesis in the Semi-Solid State
using Spray Atomization and Deposition", proceedings of symposium
on the Nature and Properties of Semi-solid Materials, J.
A. Sekhar and J. A. Dantzig, eds., Annual 1992 TMS meeting, San Diego,
CA, The Metallurgical Society, Warrendale, PA, pp. 201-230, 1992. |
| I13. |
E. J. Lavernia, "Synthesis of Discontinuously Reinforced Metal
Matrix Composites using Spray Atomization and Co-Deposition",
Conference Proceedings, Ist International Korea-U.S. Symposium
on Advanced Materials, Dec. 1, 1992, in press. |
| I14. |
E. J. Lavernia, "Synthesis of Discontinuously Reinforced Metal-Matrix
Composites using Spray Atomization and Co-Deposition", Defense
Science Journal, Special Issue on Materials Science and Engineering,
Vol. 43, Number 4, October 1993, pp. 301-321. |
| I15. |
F. H. Froes, E. J. Lavernia, C. Suryanarayana, and G. E. Bobeck,
"Innovations in Light Metal Synthesis for the 1990's",
SAMPE Quarterly, Vol. 22, No. 4, pp. 11-20, July, 1991. |
| I16. |
G. Slovioff, E. J. Lavernia, D. Eliezer, E. Aghion, and F. H. Froes,
"Hydrogen Effects on Al-Ti-SiCp Materials", SAMPE
Quarterly, Vol. 25, No. 1, pp. 46-50, 1993. |
| I17. |
X. Liang and E. J. Lavernia, "Microstructure Evolution During
the Spray Deposition of Ni3Al and Ni3Al Composites", JOM,
Vol. 45, No. 7, pp. 50-55, 1993. |
| I18. |
F. H. Froes, C. Suryanarayana, and E. J. Lavernia, "Innovations
of Light Metals Synthesis for Aerospace Applications", conference
proceedings, ASM Int. Conference of Engineering Structural Materials,
August 30-Sept. 2, 1992, San Francisco, CA. |
| I19. |
E. J. Lavernia, J. Zhang, and R. J. Perez, "Damping Behavior
and Mechanisms in Discontinuously Reinforced Metal Matrix Composites
Processed using Spray Atomization and Deposition", Key
Engineered Materials, Trans. Tech. Publications, Switzerland,
E. Armanios, Y. W. Mai and F. H. Wohlbier, eds., Vol. 104-107, pp.
691-728, 1995. |
| I20. |
E. J. Lavernia, M. L. Lau, and H. G. Jiang, "Thermal Spray Processing
of Nanocrystalline Materials", Nanostructured Materials,
Proceedings of the NATO Advanced Study Institute on Nanostructures
Materials: Science and Technology, G. M. Chow and N. J. Noskova,
eds., pp. 283-302, 1998, August 10-20, 1997, St. Petersburg, Russia. |
| I21. |
M. L. Lau, H. G. Jiang and E. J. Lavernia, "Synthesis and Characterization
of Nanocrystalline 316-Stainless Steel Coatings by High Velocity
Oxy-Fuel Spraying", Thermal Spray, Proceedings of
15th International Thermal Spray Conference, C. Coddett, ed., Vol.
1, pp. 379-384, May 25-29, 1998, Nice, France. |
| I22. |
J. He, M. Ice and E. J. Lavernia, "Synthesis and Characterization
of Nanocomposite Coatings", Nanostructured Films and Coatings,
Proceedings of NATO Advanced Research Workshop, in press, 1999,
June 28-30, 1999, Santorini, Greece. |
| I23. |
E. J. Lavernia and Q. Xu, "Fundamental Concepts and Potential
Applications of Spray Forming," The Japan Institute of Light
Metals, Special Issue on Science and Technology of Light Materials
in the 21st Century, Vol. 50, No 10 issue, pp. 479-485, 2000. |
| I24. |
Q. Xu and E. J. Lavernia, "Fundamentals of the Spray Forming
Process, " Plenary Lecture, in Conference Proceedings of
the First International Conference on Atomization and Spray Deposition,
pp. 17-36, 26-28 June 2000, Bremen, Germany. |
| I25. |
E. J. Lavernia, Yue Wu, Qingzhou Xu, and T. S. Srivatsan"Synthesis
and Microstructural Evolution of Particulate-Reinforced Metal Matrix
Composites By The Technique of Spray Atomization and Deposition",
International Conference, Workshop and Exhibition on Advances in
Composites-2000 (Composites for the Next Millennium) and published
in the proceedings ( Editor: Prof. E. S. Dwarakadasa), Bangalore,
India, August 24-26, 2000. |
