(ii). Papers in Conference Proceedings (only last 5 years)
| P98. |
J.P. Delplanque, E. J. Lavernia, and R. H. Rangel, "Simulation
of Micropore Formation in Spray Deposition Processes", Transport
Phenomena in Materials Processing and Manufacturing, Proceedings
of the 1996 ASME Second Int. Conf. on Heat Transfer in Multiphase
Flow, Vol. HTD/FED 240, pps. 275-282, Nov. 11-17, 1997. |
| P99. |
Y. Li, E. J. Lavernia and F. A. Mohamed, "High Temperature
Deformation in a Ta-W Alloy", Tantalum. Proceedings of
a Symposium Held at 125th TMS Annual Meeting and Exhibition,
E. Chen, A. Crowson, E. Lavernia, W. Ebihara, P. Kumar, eds., 125th
TMS, p.335-41, 1996, Anaheim, CA. |
| P100. |
S. Ho and E. J. Lavernia, "Investigation of Thermal Residual
Stresses in Layered 2024Al/SiC Composite using Finite Element Method
and X-Ray Diffraction", Processing and Fabrication of Advanced
Materials V, T. S. Srivatsan, J. J. Moore, eds., pp.265-277, October
6-10, 1996, 1996 TMS/ASM International Symposium on Processing and
Fabrication of Advanced Materials, Cincinnati, OH. |
| P101. |
B. Li and E. J. Lavernia, "Spray Forming of g-Ti-Al Alloys",
Third International Conference on Spray Forming, August 1996, Cardif,
Wales, U. K.. |
| P102. |
J.-P. Delplanque, R. H. Rangel and E. J. Lavernia, "Manufacturing
of Net-Shapes using Spray Forming: Integration of Process Design,
Energy and Environmental Issues", July 25-26, 1996, Proceedings
of the 1996 Int. Conf. on Environmentally Conscious Manufacturing,
Cleveland, OH. |
| P103. |
S. Anand, T. S. Srivatsan, Y. Wu and E. J. Lavernia, "The Tensile
Behavior of a Spray Deposited Aluminum-Silicon Alloy",
Processing and Fabrication of Advanced Materials V, T. S. Srivatsan,
J. J. Moore, eds., pp.121-144, October 6-10, 1996, 1996 TMS/ASM International
Symposium on Processing and Fabrication of Advanced Materials, Cincinnati,
OH. |
| P104. |
T. Hsieh, H. Choe, E. J. Lavernia, and J. Wolfenstine, "Processing
and Properties of MoSi2-Si3N4 Composites", Proceedings
of the Fifth International Symposium on Advanced Materials, Processing
and Fabrication of Advanced Materials, T. S. Srivatsan and J.
Moore, eds., pp. 337-346, 1996, TMS, Warrendale, PA. |
| P105. |
J.P. Delplanque, R. H. Rangel, and E. J. Lavernia, "Manufacturing
of Net-Shapes Using Spray Forming: Integration of Process Design,
Energy and Environmental Issues", Proceedings of the Fourth
International Congress of Environmentally Conscious Design and Manufacturing,
M. Shahinpoor and J. Weinrach, eds., pp. 87-94, July 23-25, 1996,
Vol. 4, Cleveland, OH. |
| P106. |
H. G. Jiang, R. Perez, M. L. Lau and E. J. Lavernia, "Structural
Evolution of Fe Rich Fe-Al Alloys during Ball Milling and Subsequent
Heat Treatment", Nanophase and Nanocomposite Materials
II, S. Komarneni, J. C. Parker, H. J. Wollenberger, eds., pp.297-302,
1997, Proceedings of the 1996 MRS Meeting, Boston, MA. |
| P107. |
S. Anand, Y. Wu, T. S. Srivatsan and E. J. Lavernia, "Spray
Atomized and Deposited Hypereutectic Aluminum-Silicon Alloy",
Proceedings of the Sixth International Symposium on Processing
and Fabrication of Advanced Materials VI, K. A. Khor, T. S. Srivatsan
and J. J. Moore, eds., Sept. 1997, Nanyang Technological University,
Singapore. |
| P108. |
L. Martinez, M. Amaya, O. Flores, D. Lawrynowicz and E. J. Lavernia,
"High Temperature Fracture During Forging of FeAl Intermetallic
Alloys Fabricated Using Spray Atomization and Alumina Particulate",
Proceedings of the Seventh International Conference on Creep
and Fracture of Engineering Materials and Structures, J. C.
Earthman and F. A. Mohamed, eds., pp. 395-404, August 10-15, 1997,
University of California, Irvine. |
| P109. |
E. J. Lavernia, M. L. Lau, and H. G. Jiang, "Thermal Spray Processing
of Nanocrystalline Materials", Nanostructured Materials,
Proceedings of the NATO Advanced Study Institute on Nanostructures
Materials: Science and Technology, G. M. Chow and N. J. Noskova,
eds., pp. 283-302, 1998, August 10-20, 1997, St. Petersburg, Russia.
|
| P110. |
J.-P. Delplanque, W. D. Cai and E. J. Lavernia, "Evaluating
Porosity in Spray Deposited Materials", Solidification
1998, Proceedings of the 1998 TMS Annual Meeting, S. P. Marsh,
J. A. Dantzig, R. Trivedi, W. Hofmeister, M. G. Chu, E. J. Lavernia,
J.-H. Chun, eds., pp.451-460, February 15-19, 1998, San Antonio,TX.
|
| P111. |
S. Dai, J.-P. Delplanque and E. J. Lavernia, "Grain Growth
Following Recrystallization in Reactive Spray Deposited Al-Mg-Mn
Alloys", conference proceedings 1998 IMECE meeting; session,
"Transport Phenomena in Rapid Solidification Processing",
November, 1998, Anaheim, CA. |
| P112. |
J. A. Juarez-Islas, C. G. Rivera, Y. Zhou, E. J. Lavernia, "Solidification
behaviour of atomized Al-Fe powders", Rapidly Quenched
and Metastable Materials, Proceedings of the Ninth International
Conference on Rapidly Quenched and Metastable Materials, P.
Duhaj, P. Mrafko, P. Svec, eds., pp. 422-425, August 25-30, 1996,
Bratislava, Slovakia. |
| P113. |
Q. Xu, R. W. Hayes, W. H. Hunt, Jr. and E. J. Lavernia, "Mechanical
Properties and Fracture Behavior of Functionally Graded 6061/SiCp
Composites Produced by Spray Atomization and Co-Deposition",
conference proceedings of the 1998 International Conference on Powder
Metallurgy & Particulate Materials, May 31 - June 4, 1998, Las
Vegas, NV. |
| P114. |
S. M. Jaffe, E. J. Lavernia, "The Deposition Efficiency of
Thermally Sprayed Nanopowders", conference proceedings of The
United Thermal Spray Conference, March 17-19, 1999, Dusseldorf,
Germany. |
| P115. |
O. Flores, F. Perez, E. J. Lavernia and L. Martinez, "TEM
Characterization of FeAl Ordered Intermetallic Compound Fabricated
by Spray-Atomization and Deposition", conference proceedings
of ICEM14, Symposium U, Vol. II, August 31 - September 4, 1998,
Cancun, Mexico. |
| P116. |
V. Tellkamp, M. Ice and E. J. Lavernia, "Consolidation and
Mechanical Properties of Nanostructured Al-Alloys", conference
proceedings of Powder Metallurgy Aluminum & Light Alloys for
Automotive Applications Conference, November 10-11, 1998, Dearborn,
MI. |
| P117. |
M. Al-Hajri, L. DelCastillo, T. S. Srivatsan and E. J. Lavernia,
"The Cyclic Fatigue and Fracture Behavior of a Spray Atomized
and Deposited Aluminum Alloy", Processing and Fabrication
of Advanced Materials VIII, conference proceedings of Eighth
International Conference on Processing and Fabrication of Advanced
Materials, September 7-9, 1999, Singapore. |
| P118. |
J. He, M. Ice and E. J. Lavernia, "Synthesis and Processing
of Nanostructured Cr3C2-NiCr Coatings using Mechanical Milling and
HVOF", Journal of Metastable and Nanocrystalline Materials,
Vols. 2-6, pp. 237-246, 1999, Proceedings of ISMANAM 98, December
7-12, 1998, Wollongong, Australia. |
| P119. |
J. He, M. Ice, E. J. Lavernia, "Thermal Stability of Nanostructured
Cr3C2-NiCr Coatings", Proceedings of ISMANAM-99, August 29
- September 3, 1999, Dresden, Germany. |
| P120. |
S. Dai, J.-P. Delplanque, R. H. Rangel and E. J. Lavernia, "Modeling
of Reactive Spray Atomization and Deposition", Thermal
Spray, Proceedings of 15th International Thermal Spray Conference,
C. Coddett, ed., Vol. 1, pp. 341-346, May 25-29, 1998, Nice, France. |
| P121. |
M. L. Lau, H. G. Jiang and E. J. Lavernia, "Synthesis and Characterization
of Nanocrystalline 316-Stainless Steel Coatings by High Velocity
Oxy-Fuel Spraying",Thermal Spray, Proceedings of 15th
International Thermal Spray Conference, C. Coddett, ed., Vol. 1,
pp. 379-384, May 25-29, 1998, Nice, France. |
| P122. |
H. G. Jiang, M. L. Lau and E. J. Lavernia, "Thermal Stability
of Nanocrystalline Inconel 718 and Ni Prepared by High Velocity
Oxy-Fuel (HVOF) Thermal Spraying", Thermal Spray,
Proceedings of 15th International Thermal Spray Conference, C. Coddett,
ed., Vol. 2, pp. 1265-1269, May 25-29, 1998, Nice, France. |
| P123. |
J. He, M. Ice and E. J. Lavernia, "Synthesis and Characterization
of Nanocomposite Coatings", Nanostructured Films and Coatings,
Proceedings of NATO Advanced Research Workshop, in press, 1999,
June 28-30, 1999, Santorini, Greece. |
| P124. |
A. Amaya, E. J. Lavernia and L. Martinez, "High Temperature
Corrosion of Spray Atomized FeAl(40 at %) Based Alloys Immersed
in a Molten Salt Mixture of V2O5 - Na2So4", Materials Research
Society Proceedings, Vol 552, 1999. KK 4.9.1- KK4.9.6. |
| P125. |
M. Ice, R. Rodriguez, D. Cheng, G. Kim, M. Trudeau, J. Terlecki
and E. J. Lavernia, "Synthesis and Characterization of Cryomilled
SiC Reinforced Composite Coatings", ISMANAM-99 Proceedings,
September 1999, Dresden, Germany 1999. |
| P126. |
Degang Cheng, Jianhong He, Rodolfo Rodriguez, Mike Ice, and E.
J. Lavernia, "Synthesis Of Nanocrystalline Inconel 625 Powders
By Cryomilling", Proceedings of Surface Engineering
in Materials Science I (2000 TMS annual meeting), edited by S. Seal,
N.B. Dahotre, J. J. Moore and B. Mishra, pp. 13-21, March 12-16,
2000, Nashville, Tennessee. |
| P127. |
Q. Xu and E. J. Lavernia, "Numerical calculations of heat
transfer and nucleation in the initially deposited material during
spray atomization and deposition", proceedings of the 4th.
International Conference on Spray Forming, Sept. 13-15, 1999, Baltimore,
MD |
| P128. |
Q. Xu, D. Cheng, G. Trapaga and E. J. Lavernia, "Fundamental
fluid dynamics during liquid metal atomization", Proceedings
of 2000 TMS annual meeting on liquid metal atomization: fundamentals
and practice, edited by K.P. Cooper, I.E. Anderson, S.D. Ridder
and F. S. Biancaniello, pp. 37-48, Mar. 12-16, 2000, Nashville, TN.
. |
| P129. |
L. DelCastillo and E. J. Lavernia, "Spray Atomization and
Deposition of Al-Cu-Mg-Ag", proceedings of the 4th. International
Conference on Spray Forming, Sept. 13-15, 1999, Baltimore, MD. |
| P130. |
Rodolfo Rodriguez, Mike Ice, G. Kim and E. J. Lavernia, "Thermal
Spraying of Nanocomposite Coatings", Proceedings of 2000
TMS annual meeting on Ultrsfine Grained Materials, edited by R. S.
Mishra, S. L. Semiatin, C. Suryanarayana, N. N. Thadhani and T. C.
Lowe, pp. 73-87, March 12-16, 2000, Nashville, Tennessee. |
| P131. |
Jianhong He, Mike Ice, and E. J. Lavernia, "Bond Strength
and Fracture Behavior of Nanostructured NiCr/CrC coatings,"
conference proceedings (1999 TMS Fall meeting), November 1-9, 1999,
Cincinnati, Ohio. |
| P132. |
Jianhong He, Mike Ice, and E. J. Lavernia, "Precipitation
Phenomenon in Nanostructured NiCr/CrC coatings," conference
proceedings (1999 TMS Fall meeting), November 1-9, 1999, Cincinnati,
Ohio. |
| P133. |
G. Aguilar, W. Vekruysse, B. Majaron, Y. Zhou, J. S. Nelson and
E. J. Lavernia, "Modeling of Cryogenic Spray Temperature
and Evaporation Rate Based on Single-Droplet Analysis,"
conference proceedings (Eight International Conference on Liquid
Atomization and Spray Systems, Pasadena, CA) July 2000. |
| P134. |
S. Armster and E. J. Lavernia, "Electrohydrodynamic Single
Droplet Generator for Conductive Fluids," conference proceedings
(Eight International Conference on Liquid Atomization and Spray
Systems, Pasadena, CA) July 2000. |
| P135. |
Jianhong He, Michael Ice, Michale Peters and E. J. Lavernia, "Influence
of fuel-chemistry, fuel-oxygen ratios, and particle size on Near
Nanostructured WC-18% Co Coatings," conference proceedings
(Fifth International Conference on Nanostructed Materials (NANO
2000), Sendai, Japan) August 20-25, 2000. |
| P136. |
F. Zhou, K. H. Chung, and E. J. Lavernia, "Processing
of Nanocrystalling Al-based Materials by Mechanical Attrition in
Liquid Nitrogen," conference proceedings (TMS-Fall 2000
"Powder metallurgy Alloys and Particulate Materials for Industrial
Applications, St. Louis, MO) October 8-12, 2000. |
| P137. |
G. Aguilar, Boris Majaron, Wim Verkruyesse, J. Stuart Nelson and
E. J. Lavernia, "Characterization of Cryogenic Spray Nozzles
with application to Skin Cooling," conference proceedings
(IMECE 2000, The International Mechanical Engineering Congress and
Exposition, Orlando, Florida) November 5-10, 2000. |
| P138. |
G. Aguilar, Boris Majaron, John A. Viator, Brooke Basinger, Emil
Karapetina, Lars. O. Svaasand, Enrique J. Lavernia and J. Stuart
Nelson, "Influence of Spraying distance and Post-Cooling
on Cryogen Spray Cooling for Dermatologic Laser Surgery"
conference proceedings (BiOS 2001, San Jose, CA) January 2001. Proc.
SPIE, Vol. 4244, January 2001. |
| P139. |
Boris Majaron, G. Aguilar, Brooke Basinger, Lise L. Randeberg,
Lars. O. Svaasand, Enrique J. Lavernia and J. Stuart Nelson, "Sequential
Cryogen Spraying For Heat Flux Contral at the Skin Surface"
conference proceedings (BiOS 2001, San Jose, CA) January 2001. Proc.
SPIE, Vol. 4244, January |
| P140. |
Yongseok Chae, Sergio Diaz, Enrique J. Lavernia and Brian J. F.
Wong, "Finite Element Analysis of Thermal Residual Stress
and Temperature Changes in Cartilage During Laser Radiation"
conference proceedings (SPIE's BiOS 2001, San Jose, CA) January
2001. Proc. SPIE, Vol. 4244, January 2001 |
| P141. |
F. Zhou, R. Rodriguez and E. J. Lavernia, "Thermally Stable
Nanocrystalline Al-Mg Alloy Powders Produced by Cryomilling",
Journal of Metastable and Nanocrystalline Materials, In
press 2001, Proceedings of ISMANAM 2001, June 24-28, 2001, Ann Arbor,
MI. |
| P142. |
Y. Lin, Y. Zhou and E. J. Lavernia, "Oxidation Behavior
of Droplet during Reactive Atomization and Deposition of 5083 Al,"
conference proceedings (2001 TMS Fall meeting), November 4-8, 2001,
Indianapolis, Indiana. |
| P143. |
Guillermo Aguilar, Sergio H. Diaz Valdes, J. Stuart Nelson and
Enrique J. Lavernia, "Effect of Time-Dependent Boundary
Conditions on Epidermal Tissue Damage during Port Wine Stain Laser
Surgery" conference proceedings ASME 2001, BED-Vol. 51,
2001 Advances in Bioengineering |
| P144. |
F. Zhou, Y. T. Chou and E. J. Lavernia, "Mechanical Alloying
in Nanostructured Fe-Zn Binary System", conference proceedings
(2002 TMS Annual Meeting) International Symposium on Science and
Technology of Interfaces, in honor of Dr. Bhakta Rath, February
17-21, 2002, Seattle, Washington. |
| P145. |
Sergio Diaz, Enrique J. Lavernia and Brian J. F. Wong, "Mechanical
Behavior of Cartilage During Laser Irradiation" conference
proceedings (SPIE's BiOS 2001, San Jose, CA) January 20-26, 2001.
|
| P146. |
Kyung H. Chung, Jongang Lee, Rodolfo Rodriguez and E. J. Lavernia,
"Microstructural Investigation of Grain Growth in Cryomilled
Inconel 625 Powder," conference proceedings 2001 MRS Fall
Meeting, November 26-30, 2001, Boston, Massachusetts. |
| P147. |
K. H. Chung, R. Rodriguez and E. J. Lavernia, "Grain Growth
Behavior in Nanocrystalline Inconel 625" 22nd Riso International
Symposium on Materials Science conference proceedings, September
3-7, 2001, Roskilde, Denmark |
| P148. |
Sergio H. Díaz, Guillermo Aguilar, Reshmi Basu, Enrique
Lavernia, and Brian J. F. Wong, "Modeling the Thermal Response
of Porcine Cartilage to Laser Irradiation", conference
proceedings (SPIE's BiOS 2002, San Jose, CA) January 20-26, 2002. |
