(i). Journal Papers (only last
5 years shown)
| J147. |
D. Lawrynowicz, J. Wolfenstine and E. J. Lavernia, "Grain
Growth Mechanisms in a Ni3Al/Al2O3 Composite in the Presence of
a Liquid Phase", Materials Science and Engineering,
A230, pp. 1-13, 1997. |
| J148. |
Y. Wu, L. Del Castillo and E. J. Lavernia, "Superplastic Behavior
of Spray Deposited 5083 Al", Metallurgical and Materials
Transactions A, Vol. 28A, pp. 1059-1068, 1997. |
| J149. |
D. E. Lawrynowicz, B. Li and E. J. Lavernia, "Particle Penetration
During Spray Forming and Co-Injection of Ni3Al + B/Al2O3 Intermetallic
Matrix Composite", Metallurgical and Materials Transactions
B, Vol. 28B, pp. 877-897, 1997. |
| J150. |
J.-P. Delplanque, W. D. Cai, R. H. Rangel and E. J. Lavernia, "Spray
Atomization and Deposition of Tantalum Alloys", Acta Materialia,
Vol. 45, No. 12, pp. 5233-5243, 1997. |
| J151. |
S. Ho and E. J. Lavernia, "Investigation of Thermal Residual
Stresses in Layered Composite Using Finite Element Method and X-ray
Diffraction", Metallurgical and Materials Transactions,
Vol. 28B, pp. 969-978, 1997. |
| J152. |
B. Li, J. Wolfenstine, J. C. Earthman and E. J. Lavernia, "Compressive
Creep Behavior of Spray Formed Gamma Titanium Aluminide", Metallurgical
and Materials Transactions A, Vol. 28A, No. 9, pp. 1849-1857,
1997. |
| J153. |
B. Li and E. J. Lavernia, "Analysis of Sieving Data in Reference
to Powder Size Distribution", Acta Materialia, Vol.
46, No. 2, pp. 617-629, 1998. |
| J154. |
X. Liang, J. Wolfenstine A. Sickinger and E. J. Lavernia, "In-Situ
Carburized Coating produced by Reactive Plasma Spraying Low Carbon
Steel with Methane", Materials Science and Engineering,
Vol. A212, pp. 51-61, 1996. |
| J155. |
R. Perez, B. Huang, and E. J. Lavernia, "Thermal Stability
of Nanocrystalline Fe-10 wt.% Al Produced by Cryogenic Mechanical
Alloying", NanoStructured Materials, Vol. 7, No. 5,
pp. 565-572, 1996. |
| J156. |
S. Ho and E. J. Lavernia, "Investigation of Thermal Residual
Stresses in Spray Atomized and Deposited g-TiAl using Finite Element
Method", Journal of Materials Synthesis and Processing,
Vol. 3, No. 6, pp. 403-414, 1995. |
| J157. |
S. Ho and E. J. Lavernia, "The Effect of Ceramic Reinforcement
on Residual Stresses during Spray Atomization and Co-Deposition
of Metal Matrix Composites", Scripta Metallurgica et Materialia,
Vol. 34, No. 12, pp. 1911-1918, 1996. |
| J158. |
B. Li, W. Cai and E. J. Lavernia, "Spray Forming of _ Ti-Al",
Journal of Materials Synthesis and Processing, Vol. 4,
No. 1, pp. 35-41, 1996. |
| J159. |
N. Yang, S. E. Gunthrie, S. Ho and E. J. Lavernia, "High Pressure
Spray Atomization of Pd-Rh Powders", Journal of Materials
Synthesis and Processing Vol. 4, No. 1, pp. 15-22, 1996. |
| J160. |
M. Gupta and E. J. Lavernia, "Effect of Processing on the
Microstructural Variation and Heat Treatment Response of a Hypereutectic
Al-Si Alloy", Journal of Materials Processing Technology,
Vol. 54, pp. 261-270, 1995. |
| J161. |
Y. Wu and E. J. Lavernia, "Spray Synthesis of Superplastic
Materials for Near-Net-Shape Manufacturing", Atomization
and Sprays, Vol. 7, pp. 115-122, 1997. |
| J162. |
M. Wu, J. Zhang, J. Lewandowski, W. Hunt and E. J. Lavernia, "Enhanced
Fracture Toughness of a Layered 6061/SiCp DRA Material Produced
by Spray Deposition", Journal of Materials Synthesis and
Processing, Vol. 4, No. 2, pp. 127-134, 1996. |
| J163. |
R. Perez, H. G. Jiang, and E. J. Lavernia, "Grain Size Stability
of Nanocrystalline, Cryomilled Fe-3 wt.% Al", NanoStructured
Materials, Vol. 9, pp. 71-74, 1997. |
| J164. |
M. Lau, R. Perez, H. G. Jiang, and E. J. Lavernia, "Synthesis
and Characterization of Bulk Nanocrystalline M50 Tool Steel",
NanoStructured Materials, Vol. 9, pp. 157-160, 1997. |
| J165. |
M. Lau, B. Huang, R. J. Perez, J. Juarez-Islas, and E. J. Lavernia,
"Synthesis of Nanocrystalline M50 Steel Powders by Cryomilling",
NanoStructured Materials, Vol. 7, No. 8, pp. 847-856, 1996. |
| J166. |
N. Yang, S.E. Gunthrie, S. Ho and E. J. Lavernia, "Solidification
Behaviour of Pd-Rh Droplets during Spray Atomization", Journal
of Materials Science, Vol. 32, pp. 6589-6594, 1997. |
| J167. |
S. Ho and E. J. Lavernia, "The Effect of Heat Transfer Coefficient
on Thermal Residual Stresses in Spray Deposited Materials",
Scripta Materialia, Vol. 36, No. 3, pp. 283-290, 1997.
|
| J168. |
V. L. Tellkamp, M. Lau, A. Fabel, and E. J. Lavernia, "Thermal
Spraying of Nanocrystalline Inconel 718", NanoStructured
Materials, Vol. 9, pp. 489-492, 1997. |
| J169. |
T. Hsieh, H. Choe, E. J. Lavernia, and J. Wolfenstine "Effect
of Si3N4 on the Thermal Expansion Behavior of MoSi2", Materials
Science Letters, Vol. 30, Nos. 5-6, pp.407-410, 1997. |
| J170. |
S. Anand, T. S. Srivatsan, Y. Wu and E. J. Lavernia, "Processing,
Microstructure and Fracture Behavior of a Spray Atomized and Deposited
Aluminum Silicon Alloy", Journal of Materials Science,
Vol. 32, pp. 2835-2848, 1997. |
| J171. |
H. Jiang, M. Rühle and E. J. Lavernia, "On the Applicability
of the X-Ray Diffraction Line Profile Analysis in Extracting Grain
Size and Microstrain in Nanocrystalline Materials", Journal
of Materials Research, Vol. 14, No. 2, pp. 549-559, 1999. |
| J172. |
W. D. Cai and E. J. Lavernia, "Modeling of Porosity During
Spray Forming", Materials Science and Engineering A,
pp. 8-12, 1997. |
| J173. |
N. Yang, S. L. Robinson, C. H. Cadden, S. Ho and E. J. Lavernia,
"The Effect of Cooling Rate on the Segregation Behavior of
Pd-Rh Droplets Processed by Spray Atomization", Journal
of Materials Synthesis and Processing, Vol. 4, No. 5, pp. 325-335,
1996. |
| J174. |
S. C. Lim, M. Gupta, Y. F. Leng and E. J. Lavernia, "Wear of
a Spray Deposited Hypereutectic Aluminum-Silicon Alloy", Journal
of Materials Processing Technology, Vol. 63, pp. 865-870, 1997. |
| J175. |
S. L. Dai, Y. Wu, L. Del Castillo and E. J. Lavernia, "Microstructure
and Properties of Spray Deposited High Li Al-Li-Mg-Ge-Zr Alloys",
Scripta Materialia, Vol. 37, No. 3, pp. 265-270, 1997. |
| J176. |
Y. Zhou, Y. Wu, and E. J. Lavernia, "Process Modeling in Spray
Deposition: a Review", International Journal of Non-Eqilibrium
Processing, Vol. 10, Issue 2, pp. 95-183, 1997. |
| J177. |
J.-P. Delplanque, E. J. Lavernia and R. H. Rangel, "Numerical
Investigation of Phase Flow Induced Porosity Formation in Spray
Deposited Materials", International Journal of Non-Equilibrium
Processing, Vol. 10, pp. 185-199, 1997. |
| J178. |
B. Li, N. Nordstrom and E. J. Lavernia, "Spray Forming of Zircaloy-4",
Materials Science and Engineering A237, pp. 207-215, 1997. |
| J179. |
B. Li and E. J. Lavernia, "Spray Forming and Co-Injection
of Particulate Reinforced TiAl/TiB2 Composites", Acta Materialia,
Vol. 49, No. 12, pp. 5015-5030, 1997. |
| J180. |
J. A. Juarez-Islas, B. Campillo, R. Perez, S. Su and E. J. Lavernia,
"Characterization of a Solid Solution of Cu in Al-Cu-SiCp Metal
Matrix Composites Processed by Spray Atomization and Co-Deposition",
Journal of Materials Science, Vol. 33, pp. 259-263, 1998. |
| J181. |
B. Li and E. J. Lavernia, "Spray Atomization and Deposition
of Gamma Titanium Aluminide Alloys", Journal of Materials
Synthesis and Processing, Vol 5, No. 1, pp. 51-58, 1997. |
| J182. |
W. D. Cai, J. Smugeresky and E. J. Lavernia, "Low Pressure
Spray Forming of 2024 Aluminum Alloy", Materials Science
and Engineering A241, pp.60-71, 1998. |
| J183. |
J.-P. Delplanque, S. Dai, R. H. Rangel and E. J. Lavernia, "Reactive
Spray Atomization and Deposition of Aluminum Alloys: Microstructure
and Dispersoid Characterization", Journal of Materials
Synthesis and Processing, Vol. 5, No. 1, 1997. |
| J184. |
H. G. Jiang, R. J. Perez, M. L. Lau and E. J. Lavernia, "Formation
kinetics of nanocrystalline Fe-4 wt. % Al solid solution during
ball milling", Journal of Materials Research, Vol.
12, No. 6, pp. 1429-1432, 1997. |
| J185. |
J. Zhang, R. J. Perez and E. J. Lavernia, "Damping Behavior
of 6061Al/SiC/Gr Spray-Deposited Composites", Standards
for Materials, Products, Systems & Services, STP 1304,
pp. 313-330, 1997. |
| J186. |
H. Choe, T. Hsieh, Y. Wu, E. J. Lavernia and J. Wolfenstine, "The
Effect of Powder Processing on the Mechanical Behavior of MoSi2-10
Vol% Si3N4 Composites", Journal of Materials Synthesis
and Processing, Vol. 4, No. l4, pp. 235-243, 1996. |
| J187. |
Y. Zhou, S.W. Lee, V. G. McDonell, G. S. Samuelsen, R. L. Kozarek
and E. J. Lavernia, "Characterization of Linear Spray Atomization
and Deposition for Continuous Production of Aluminum Alloys",
Journal of Materials Synthesis and Processing, Vol. 5,
No. 1, pp. 111-116, 1997. |
| J188. |
Y. Zhou, S.W. Lee, V. G. McDonell, G. S. Samuelsen, R. L. Kozarek
and E. J. Lavernia, "Influence of Operating Variables on Average
Droplet Size During Linear Atomization", Journal of the
International Institutes for Liquid Atomization and Spray Systems,
Vol. 7, No. 4, pp. 339-358, 1997. |
| J189. |
W. D. Cai and E. J. Lavernia, "Numerical Simulation of Porosity
Evolution During Spray Forming of Ta-2.5 wt% Fe", Journal
of Materials Synthesis and Processing, Vol. 5, No. 1, pp. 39-44,
1997. |
| J190. |
L. Martinez, O. Flores, M. Amaya, A. Duncan, S. Viswanathan, D.
Lawrynowicz and E. J. Lavernia, "The Role of Alumina Particulate
in Microstructural and Forging Properties of Spray-Atomized and
Deposited Fe-Al Ordered Intermetallic Compounds", Journal
of Materials Synthesis and Processing, Vol. 5, No. 1, pp. 65-76,
1997. |
| J191. |
J. L. Estrada, E. Nicolas and E. J. Lavernia, "Microstructure
Characterization of Al-Li and MMCS Preforms Processed by Spray Atomization
and Deposition", Journal of Materials Synthesis and Processing,
Vol. 5, No. 1, pp. 77-85, 1997. |
| J192. |
T. S. Srivatsan, S. Anand, Y. Wu and E. J. Lavernia, "The Fatigue
Response and Fracture Behavior of a Spray Atomized and Deposited
Aluminum-Silicon Alloy", Journal of Materials Engineering
and Performance, Vol. 6, No. 5, pp. 654-663, 1997. |
| J193. |
W. Cai and E. J. Lavernia, "Modeling of Porosity During Spray
Forming I. Effects of Processing Parameters", Metallurgical
and Materials Transactions B, Vol. 29B, pp. 1085-1096, 1998. |
| J194. |
W. Cai and E. J. Lavernia, "Modeling of Porosity During Spray
Forming II. Effects of Atomization Gas Chemistry and Alloy Compositions",
Metallurgical and Materials Transactions B, Vol. 29B, pp.
1097-1106, 1998. |
| J195. |
Y. Zhou, S. Lee, V. G. McDonell, G. S. Samuelsen, R. L. Kozarek and
E. J. Lavernia, "Characterization of Spray Atomization of 3003
Aluminum Alloy during Linear Spray Atomization and Deposition",
Metallurgical and Materials Transactions B, Vol. 29B, pp.793-806,
1998. |
| J196. |
Y. Zhou, S. Lee, V. G. McDonell, G. S. Samuelsen, R. L. Kozarek and
E. J. Lavernia, "Size Distribution of Spray Atomized Aluminum
Alloy Powders Produced during Linear Atomization", Materials
Science and Technology, Vol. 15, No. 1, pp. 226-234, 1999. |
| J197. |
X. D. Peng, A. Kharlov, V. Bystritski, E. Garate and E. J. Lavernia,
"Characteristics of Material Surfaces Modified Using Plasma-Enhanced
Ion Beams", Materials Science and Engineering A 251,
pp. 142-149, 1998. |
| J198. |
T. Hsieh, H. Choe, E. J. Lavernia and J. Wolferstine, "The
effect of Si3N4 on the thermal expansion behavior of MoSi2",
Materials Letters 30, pp. 407-410, 1997. |
| J199. |
V. Bystritskii, E. Garate, V. Grigoriev, A. Kharlov, E. J. Lavernia
and X. Peng, "Modification of materials surface using plasma
enhanced ion beams", Laser and Particle Beams, Vol. 6, No.
4, pp. 569-580, 1998. |
| J200. |
H. G. Jiang, M. L. Lau and E. J. Lavernia, "Grain Growth Behavior
of Nanocrystalline Inconel 718 and Ni Powders and Coatings",
NanoStructured Materials, Vol. 10, No. 2, pp. 169-178,
1998. |
| J201. |
S. L. Dai, J.P. Delplanque and E. J. Lavernia, "Microstructural
Characteristics of 5083 Al Alloys Processed by Reactive Spray Deposition
for Net-shape Manufacturing", Metallurgical and Materials
Transactions A, Vol. 29A, pp. 2597-2611, 1998. |
| J202. |
R. J. Perez, H. G. Jiang, C. P. Dogan and E. J. Lavernia, "Grain
Growth of Nanocrystalline Cryomilled Fe-AL Powders", Metallurgical
and Materials Transactions A, Vol. 29A, pp. 2469-2475, 1998. |
| J203. |
M. L. Lau, H. G. Jiang, W. Nuchter,and E. J. Lavernia, "Thermal
Spraying of Nanocrystalline Ni Coatings", Solidi Status
Physica, pp. 257-268, 1998. |
| J204. |
B. Huang, R. J. Perez, H. Hu and E. J. Lavernia, "Grain growth
of nanocrystalline Fe-Al alloys produced by cryomilling in liquid
argon and nitrogen", Materials Science and Engineering
A 255, pp. 124-132, 1998. |
| J205. |
L. Martinez, M. Amaya, J. Porcayo-Calderon and E. J. Lavernia,
"High Temperature Electrochemical Testing of Spray Atomized
and Deposited Iron Aluminides Alloyed with Boron and Reinforced
with Alumina Particulate", Materials Science and Engineering
A 258, pp. 306-312, 1998. |
| J206. |
M. L. Lau, V. V. Gupta and E. J. Lavernia, "Mathematical Modeling
of Particle Behavior of Nanocrystalline Ni during High Velocity
Oxy-Fuel Thermal Spray", NanoStructured Materials,
Vol. 10, No.5, pp. 715-722, 1998. |
| J207. |
M. L. Lau, E. Strock, A. Fabel, C. J. Lavernia and E. J. Lavernia,
"Synthesis and Characterization of Nanocrystalline Co-Cr Coatings
by Plasma Spraying", NanoStructured Materials, Vol.
10, No.5, pp. 723-730, 1998. |
| J208. |
Y. Zhou, J. A. Juarez-Islas, O. Alvarez-Fregoso, W. Y. Yoon and
E. J. Lavernia, "Microstructural Characterization and Solidification
Behavior of Atomized Al-Fe Powders", Journal of Materials
Research, Vol. 14, No. 3, 1999. |
| J209. |
S. L. Dai, J.-P. Delplanque and E. J. Lavernia, "Grain Growth
in Reactive Spray Deposited 5083 Alloys", Scripta Materialia,
Vol. 40, No. 2, pp. 145-151, 1998. |
| J210. |
J.-P. Delplanque, W. D. Cai, D. White and E. J. Lavernia, "Evaluating
Porosity in Spray Deposited A2 Tool Steel", International
Journal of Powder Metallurgy, Vol. 35, No. 2, pp. 47-55, 1999. |
| J211. |
Y. Zhou, J. A. Juarez-Islas and E. J. Lavernia, "Spray Atomization
of Two Al-Fe Binary Alloys: Solidification and Microstructure Characterization",
Journal of Materials Science, Vol. 34, pp. 1211-1218, 1999. |
| J212. |
S. L. Dai, J.-P. Delplanque and E. J. Lavernia, "Effect of
Secondary Phase Particles on Post-Recrystallization Grain Growth
in Reactive Spray Deposited 5083 Al Alloys", Journal of
Materials Research, Vol. 14, No. 7, 1999. |
| J213. |
Q. Xu, R. W. Hayes, W. H. Hunt, Jr. and E. J. Lavernia, "Mechanical
Properties and Fracture Behavior of Layered 6061/SiCp Composites
Produced by Spray Atomization and Co-Deposition", Acta
Materialia, Vol. 47, No. 1, pp. 43-53, 1999. |
| J214. |
A. J. Melmed, N. C. Tambakis, M. Lau and E. J. Lavernia. "APFIM
Study of Impurities in a Nanocrystalline Fe-Al Alloy",
Progress in Surface Science, Vol. 59, pp. 313-321, 1998. |
| J215. |
V. Bystritskii, E. Garate, V. Grigoriev, A. Kharlov, E. J. Lavernia
and X. Peng, "The high power pulsed ion-beam mixing of a titanium
layer with an aluminum substrate", Nuclear Instruments
& Methods B 149, pp. 61-66, 1998. |
| J216. |
Y. Zhou, J. A. Juarez-Islas, O. Alvarez-Fregoso, W. Y. Yoon and
E. J. Lavernia, "Microstructural Characterization and Solidification
Behavior of Atomized Al-Fe Powders", Journal of Materials
Research, Vol. 14, No. 3, pp. 729-736, 1999. |
| J217. |
J. He, M. Ice and E. J. Lavernia, "Synthesis and Characterization
of Nanostructured Cr3C2-NiCr", NanoStructured Materials,
Vol. 10, No. 8, pp.1271-1283, 1998. |
| J218. |
Z. Lin, E. J. Lavernia and F. A. Mohammed, "High-Temperature
Deformation in a Ta-W Alloy", Acta Materialia, Vol.
47, No. 4, pp. 1181-1194, 1999. |
| J219. |
L. Del Castillo, Y. Wu, H. M. Hu and E. J. Lavernia, "Microstructure
and Mechanical Behavior of Spray Deposited High Li Al-Li Alloys",
Metallurgical and Materials Transactions A, Vol. 30A, pp.
1381-1389, 1999. |
| J220. |
H. G. Jiang, H. M. Hu and E. J. Lavernia, "Synthesis of Fe rich
Fe-Al nanocrystalline solid solutions using ball milling",
Journal of Materials Research, Vol. 14, No. 5, pp. 1760-1770,
1999. |
| J221. |
M. L. and E. J. Lavernia, "Microstructural Evolution and Oxidation
Behavior of Nanocrystalline 316-Stainless Steel Coatings Produced
by High Velocity Oxygen-Fuel Spraying", Materials Science
& Engineering A Special Issue - Herb Herman "Festschrift",
A 272, pp. 222-229, 1999. |
| J222. |
Z. H. Lee, H. Hu, E. J. Lavernia and D. R. White, "The Mechanism
of Porous Column Formation during Spray Forming", Metallurgical
and Materials Transactions A, Vol. 30A, pp. 1679-1682, 1999.
|
| J223. |
R. Hayes, V. Tellkamp and E. J. Lavernia, "A Preliminary Creep
Study of a Bulk Nanocrystalline Al-Mg Alloy", Scripta Materialia,
Vol. 41, No. 7, pp. 743-748, 1999. |
| J224. |
Q. Xu, V. V. Gupta, E. J. Lavernia, "On the Mechanism of Mushy
Layer Formation during Droplet-based Processing", Metallurgical
and Materials Transactions B, Vol. 30B, pp. 527-539, 1999. |
| J225. |
B. Li and E. J. Lavernia, "Particulate Penetration into Solid
Droplets", Metallurgical and Materials Transactions,
Vol. 31A, pp. 387-396. |
| J226. |
M. L. Lau, V. V. Gupta and E. J. Lavernia, "Particle Behavior
of Nanocrystalline 316-Stainless Steel During High Velocity Oxy-Fuel
Thermal Spray", NanoStructured Materials, Vol. 12,
pp. 319-322, 1999. |
| J227. |
V. L. Tellkamp and E. J. Lavernia, "Processing and Mechanical
Properties of Nanocrystalline 5083 Al Alloy", NanoStructured
Materials, Vol. 12, pp. 249-252, 1999. |
| J228. |
Q. Xu and E. J. Lavernia, "Microstructural Evolution during
the Initial Stages of Spray Atomization and Deposition", Scripta
Materialia, Vol. 41, No. 5, pp. 535-540, 1999. |
| J229. |
V. Tellkamp, M. Ice and E. J. Lavernia, "Consolidation and
Mechanical Properties of a Nanostructured 5083 Al Alloy", P/M
Science & Technology Briefs, Vol. 1, No. 2, pp. 22-25,
1999. |
| J230. |
J. He, M. Ice and E. J. Lavernia, "Synthesis of Nanostructured
Cr Cr-25 (Ni20Cr) Coatings", Metallurgical and Materials
Transactions, Vol. 31A, pp. 555-564, February 2000. |
| J231. |
J. He, M. Ice and E. J. Lavernia, "Synthesis of Nanostructed
WC-12% Co Coating Using Mechanical Milling and HVOF Thermal Spraying",
Metallurgical and Materials Transactions, Vol. 31A pp.
541-553, February 2000. |
| J232. |
J. P. Delplanque, E. J. Lavernia and R. H. Rangel, "Analysis
of In-Flight Oxidation During Reactive Spray Atomization and Deposition
Processing of Aluminum", Transactions of the ASME,
Vol 122, February 2000, pp. 126-133, 2000. |
| J233. |
H. M. Hu, E. J. Lavernia, Z. H. Lee and D. R. White, "Residual
Stresses in Spray Formed A2 Tool Steel", Journal of Materials
Research, Vol. 14, No 12, pp. 4521-4530, December 1999. |
| J234. |
V. Bystritskii, E. Garate, J. C. Earthman, A. Kharlov, E. J. Lavernia
and X. Peng, "Fatigue Properties of 2024-T3, 7075-T6 aluminum
alloys using plasma enhanced ion beams", Theoretical and
Applied Mechanics, Vol. 32, pp. 47-53, 1999. |
| J235. |
H. M. Hu, Z. H. Lee, D. R. White and E. J. Lavernia, "On the
Evolution of Porosity in Spray Deposited Tool Steels", Metallurgical
and Materials Transactions A, Vol. 31, pp. 723-733, 2000. |
| J236. |
S. Q. Armster, J.-P. Delplanque, W.-H. Lai and E. J. Lavernia,
"Mono-size Droplet Deposition as a Means to Investigate Droplet
Behavior during Spray Deposition," Metallurgical and Materials
Transactions B,Vol. 31B, pp. 1333-1344, December 2000. |
| J237. |
N. Yang, B. Li, S. Robinson and E. J. Lavernia, "Solute Segregation
Behavior in Spray Atomized Pd-Rh-V(Co) Powders", Metallurgical
and Materials Transactions A, Vol. 31 , pp. 1843-1855, July,
2000. |
| J238. |
Y. Zhou, J. Li, S. N. Nutt and E. J. Lavernia, "Spray Forming
of Ultrafine SiC Particle Reinforced 5182 Al-Mg" J. of
Materials Science, (35) pp. 4015-4023, 2000. |
| J239. |
Q. Xu, V. V. Gupta and E. J. Lavernia, "Thermal Behavior during
Droplet-based Deposition" Acta Materialia, Vol. 48,
pp. 835-849, 2000. |
| J240. |
L. Del Castillo and E. J. Lavernia, "Microstructure and Mechanical
Behavior of Spray Deposited Al-Cu-Mg (-Ag-Mn) Alloys," Metallurgical
and Materials Transactions A, Vol. 31A, pp. 2287-2298, September
2000. |
| J241. |
B. Huang, H. G. Jiang, R. Perez, S. Nutt and E. J. Lavernia, "The
Effects of Ni on the Cryogenic Attritor Milling of MetGlas Fe7B13Si9
", NanoStructured Materials, Vol. 11, No. 8, pp. 1009-1016,
1999. |
| J242. |
Y. J. Lin, J. E. Bobrow, D. White and E. J. Lavernia, "Modeling
of Spray Formed Materials: Geometrical Considerations," Metallurgical
and Materials Transactions A, Volume 31A, pp. 2917-2929, November
2000. |
| J243. |
H. M. Hu, E. J. Lavernia, W. C. Harrigan, J. Kajuch and S. R. Nutt,
"Microstructural Investigation on B4C/Al-7093 Composite ",
Materials Science an Engineering A, in press, 2000. |
| J244. |
J. He and E. J. Lavernia, "Precipitation Phenomenon in Nanostructured
Cr3C2-NiCr Coatings", Materials Science an Engineering
A301 (2001) 69-79. |
| J245. |
B.C. Moon, Z. H. Lee and E. J. Lavernia, "In-Situ Temperature
Measurement of A2 Tool Steel and Axisymmetric Thermal Analysis",
Journal of Materials Research, Vol. 15, No. 8, August 2000. |
| J246. |
B. Li, N. Yang and E. J. Lavernia, "Factors Influencing Solute
Segregation Behavior in Spray Atomized Pd Alloy Powders", Metallurgical
and Materials Transactions A, Volume 31A, pp. 2681-2686, October
2000. |
| J247. |
R. W. Hayes, V. Tellkamp, and E. J. Lavernia, "Creep behavior
of a Cryomilled ultrafine-grained Al-4% Mg alloy", Journal
of Materials Research, Vol 15, No. 10, pp. 2215-2222, October
2000. |
| J248. |
Y. J. Lin, W. Feng, J. Bobrow and E. J. Lavernia, "Modeling
of Spray Formed Plates using X-Y Moving Substrate," Metallurgical
and Materials Transactions A, Volume 32A, pp. 831-840, March
2001. |
| J249. |
T. S. Srivatsan, L. Del Castillo, B. G. Ravi, Meslet Al-Hajri and
E. J. Lavernia, "Microstructure and Mechanical Behavior of A
Spray-Atomized and Deposited Al-Cu-Mg-Ag Alloy", Journal
of Materials Synthesis and Processing, Vol. 7, No. 6, pp. 365-372,
1999. |
| J250. |
V. L. Tellkamp, S. Dalek, D, Cheng and E. J. Lavernia, "Grain
Growth Behavior of a Nanostructured 5083 Al-Mg Alloy, " Journal
of Materials Research, Vol. 16, No. 4, April 2000. |
| J251. |
J. He, L. Adelsztajn and E. J. Lavernia, "Thermal Stability
of Nanocrystalline WC-Co Powder Synthesized using Mechanical Milling
at Low Temperature", Journal of Materials Research,
Vol. 16, No. 2, February 2001. |
| J252. |
J. He, F. Zhou, G. Chang and E. J. Lavernia, "Influence of
Mechanical Milling on Microstructure of 49Fe-49Co-2V Soft Magnetic
Alloy", Journal of Materials Science, 36 (2001) 2955-2964. |
| J253. |
G. Aguilar, B. Majaron, W. Verkruysee, Y. Zhou, J. S. Nelson,
and E. J. Lavernia, "Theoretical and Experimental Analysis of
Droplet Diameter, Temperature, and Evaporation Rate Evolution on
Cryogenic Sprays", Journal of Heat and Mass Transfer,
44: 3201-3211, (2001.) |
| J254. |
G. Aguilar, B. Majaron, K. Pope, L. O. Svaasand, E. J. Lavernia
and J. S. Nelson, "Influence of Nozzle-to-Skin Distance in Cryogen
Spray Cooling for Dermatologic Laser Surgery", Lasers in
Surgery and Medicine, 28:113-120 (2001) |
| J255. |
B. Majaron, S. Kimel, W. Verkruysse, G. Aguilar, K. Pope, L. O.
Svaasand, E. J. Lavernia and J. S. Nelson, "Cryogen Spray Cooling
in Laser Dermatology: Effects of Ambient Humidity and Frost Formation",
Lasers in Surgery and Medicine, 28:469-476 (2001). |
| J256. |
J. He, M. Ice and E. J. Lavernia, "Particle Melting Behavior
during HVOF Thermal Spraying", Journal of Thermal Spray
Technology, in press, 2000. |
| J257. |
F. Zhou, J. Lee and E. J. Lavernia, "Grain Growth Kintetics
of a Mechanically Milled Nanocrystalline Al", Scripta Materialia,
Vol 44:8-9, pp. 2013-2017, 2001. |
| J258. |
V. L. Tellkamp, A. Melmed and E. J. Lavernia, "Mechanical
Behavior and Microstructure of a Thermally Stable Bulk, Nanostructured
Al Alloy, " Metallurgical and Materials Transactions,
Volume 32A, pp. 2335-2343, September 2001. |
| J259. |
D. Cheng, Q. Xu, G. Trapaga, E. J. Lavernia, "The Effect
of Particle Size and Morphology on the In-Flight Behavior of Particles
during High Velocity Oxy-fuel (HVOF) Thermal Spraying, " Metallurgical
and Materials Transactions B, Vol 32B, pp. 525-535, June 2001. |
| J260. |
D. Cheng, Q. Xu, G. Trapaga, E. J. Lavernia, "A Numerical
Study of the HVOF Process. Part I: Gas Phase Dynamics" Metallurgical
and Materials Transactions, Vol. 32A, pp. 1609-1620, July 2001.
|
| J261. |
D. H Shin, Y.-S. Kim and E. J. Lavernia, "Formation of Fine
Cementite Precipitates by Static Annealing of Equal Channel Angular
Pressed Low Carbon Steels " Acta Materialia, 49 (2001)
2387-2393. |
| J262. |
J. He, M. Ice, J. M. Schoenung, D. H. Shin, and E. J. Lavernia,
"Thermal Stability of Nanostructured Cr3C2-NiCr Coatings",
Journal of Thermal Spray Technology, Vol. 10, No. 2, pp.
293-300, June 2001. |
| J263. |
J. He, Y. Liu, Y. Qiao, T. E. Fischer and E. J. Lavernia, "Near
Nanostructured WC-18% Co Caoting with Low Amounts of Non-WC Carbide
Phase Part I: Synthesis and Characterization", Metallurgical
and Materials Transactions Vol. 33A, January 2002, pp. 145-155. |
| J264. |
Y. Liu, Y. Qiao, J. He, E. J. Lavernia, and Traugott Fischer "
Near Nanostructured WC-18% Co Coating with Low Amounts of Non-WC
Carbide Phase Part II: Hardness and Resistance to Sliding and Abrasive
Wear", Metallurgical and Materials Transactions, Vol.
33A, January 2002, pp. 159-164. |
| J265. |
F. T. Parker, F. E. Spada, A. E. Berkowitz, K. S. Vecchio, E. J. Lavernia
and R. Rodriguez, "Thick amorphous ferromagnetic coatings via
thermal spraying of spark-eroded powder", Materials Letters,
48: 184-187 (2001). |
| J266. |
Q. Xu, R. W. Hayes and E. J. Lavernia, "Creep Properties of
Ball-Milled and HIP'ed Pure Tantalum", Scripta Materialia,
45 (2001) 447-454. |
| J267. |
J. A. Juarez-Islas, M. Mendez, Y. Zhou and E. J. Lavernia, "Microstructure
and segregation profiles of nitrogen-atomized Al-2.56 wt. % Fe powders",
Journal of Materials Science, Vol. 20, pp. 139-141, 2001. |
| J268. |
F. Zhou, Y. T. Chou and E. J. Lavernia, "Formation of Supersaturated
single-phase bcc solid solutions in Fe-Zn binary system by mechanical
alloying", Materials Transactions, JIM, Vol. 42, No.
8 (2001) pp. 1566-1570. |
| J269. |
J. H. Yu, J. S. Shin, J. S. Bae, Z. H. Lee, T. D. Lee, H. M. Lee and
E. J. Lavernia, "The effect of heat treatments and Si contents
on B2 ordering reaction in high-silicon steels", Materials
Science an Engineering A307 (2001) 29-34. |
| J270. |
Q. Xu and E. J. Lavernia, "Influence of Nucleation and Growth
Phenomena on Microstructural Evolution during Droplet-based Deposition"
Acta Materialia, Vol. 49/18, pp. 3849-3861, 10/2001. |
| J271. |
D. Cheng, V. L. Tellkamp, C. J. Lavernia, and E. J. Lavernia, "Corrosion
properties of nanocrystalline co-cr coatings" Annals of
Biomedical Engineering, Vol. 29, pp.803-809, 2001. |
| J272. |
K. H. Chung, J. Lee, R. Rodriguez, and E. J. Lavernia, "Grain
Growth Behavior of Cryomilled Inconel 625 Powder during Isothermal
Heat Treatment", Metallurgical and Materials Transactions
Vol. 33A, January 2002, pp. 125-134, 2001. |
| J273. |
J. He and E. J. Lavernia, "Development of Nanocrystalline Structure
during Cryomilling of Inconel 625," Journal of Materials
Research, Vol. 16 No. 9, Sept. 2001. |
| J274. |
S. Q. Armster, J.-P. Delplanque, M. Rein, E. J. Lavernia, "Thermo-fluid
mechanisms controlling droplet-based materials processes,"
International Materials Reviews, in press, 2001. |
| J275. |
R. W. Hayes, R. Rodriguez and E. J. Lavernia, "The mechanical
behavior of a cryomilled Al-10Ti-2cu alloy" Acta Materialia,
in press, 2001. |
| J276. |
J.Lee, F. Zhou, K. H. Chun, N. J. Kim, and E. J. Lavernia, "Grain
Growth of Nanocrystalline Ni Powders Prepared by Cryomilling",
Metallurgical and Materials Transactions, Vol. 32A, December
2001, pp. 3109-3115. |
| J277. |
F. Zhou, R. Luck, K. Lu, E. J. Lavernia and M. Ruhle, "Amorphous
to crystalline transformation induced by thermal annealing of a
metastable Al90Fe10 composite", Philosophical Magazine
A, in press 2001 |
| J278. |
F. Zhou, J. Lee, S. Dallek, E. J. Lavernia, "High grain size
stability of a nanocrystalline Al prepared by mechanical attrition",
Journal of Materials Research, publication in December
1, 2001 issue. |
| J279. |
S. H. Diaz, G. Aguilar, E. J. Lavernia and B. F. J. Wong, "Modeling
the Thermal Response of Porcine Cartilage to Laser Irradiation",
IEEE Journal of JSTQE Lasers in Medicine and Biology, vol.
7, No. 6, Nov-Dec 2001. |
| J280. |
L. Ajdelsztajn, J. Lee, K. Chung, F. L. Bastian and E. J. Lavernia,
"Synthesis and Nanoindentaion Study of HVOF Thermal Sprayed
Nanocrystalline and Near-Nanocrystalline Ni Coatings", Metallurgical
and Materials Transactions, in press 2001. |
| J281. |
Q. Xu, D. Cheng, G. Trapaga, N. Yang and E. J. Lavernia, "Numerical
Analyses of Fluid Dynamics of an Atomization Configuration",
Journal of Materials Research, publication in January 1,
2002 issue. |
| J282. |
Guillermo Aguilar, Wim Verkruysse, Boris Majaron, Lars O. Svaasand,
Enrique J. Lavernia, and J. Stuart Nelson, "Measurement of
heat flux and heat transfer coefficient during continuous cryogen
spray cooling for laser dermatologic surgery", IEEE Journal
of Selected Topics in Quantum Electronics, 2001. |
| J283. |
Je-Sik Shin, Zin-Hyoung Lee, Taek-Dong Lee and E. J. Lavernia,
"The effect of casting method and heat treating condition on
cold workability of high-Si electrical steel", Scripta
Materialia, 45 (2001) 725-731. |
| J284. |
Fang Wu, P. Bellon, M. L. Lau, E. J. Lavernia, T. A. Lusby and A. J.
Melmed, "A new approach to preparing tips for atom probe field
ion microscopy from powder materials", Materials Science
an Engineering, in press 2001. |
| J285. |
F. Zhou, R. Rodriguez and E. J. Lavernia, "Thermally Stable
Nanocrystalline Al-Mg Powders Produced by Cryomilling", Materials
Science Forum, Vols 386-388, pp. 409-414, 2002. |
